Connecting To A Pc - LG 29LN300B Manual Del Usuario

Connecting to a PC

Your TV supports the Plug & Play* feature and has the built-in speakers with Virtual Surround that
reproduces sound clearly and rich bass.
* Plug & Play: The function when a PC recognizes a connected device and requires no driver to be
installed.
NOTE
It is recommended to use the TV with an HDMI connection for the best image quality.
y y
If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.
y y
If you turn the TV on when the set is cold, the screen may flicker. This is normal.
y y
Some red, green, or blue spots may appear on the screen. This is normal.
y y
Connect the signal input cable and tighten it by turning the screws clockwise.
y y
Do not press the screen with your finger for a long time as this may result in temporary distortion on
y y
the screen.
Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a
y y
screensaver if possible
If you do not use an optional external speaker, connect the external device to the TV with an optional
y y
audio cable.
When using the HDMI/DVI cable, only Single link is supported..
y y
NOTE
If you want to use HDMI-PC mode, you must set the input label to PC mode.
y y
The OSD (On Screen Display) is displayed on the screen as shown below.
y y
» When turning the product on in HDMI input.
» When switching to HDMI input.
Is the input connected to your PC?
Yes
Do not show message again.
If you select "Yes" the size and image quality are optimised for your PC.
y y
If you select "No" the size and image quality are optimised for the AV device (DVD player, set-top box,
y y
gaming device).
If you select "Do not show message again" this message does not appear until the TV is reset. You can
y y
change the set value in SETTINGS s INPUT s Input Label.
No
25
MAKING CONNECTIONS