InSinkErator Ultra System Manual Del Usuario página 4

START HERE
1
PREPARATION
A
Required minimum from
The wall outlet for your faucet must have power supplied to it continuously
and must be fused. It should not be controlled by the same wall switch
B
C
Required Hole Diameter
Consult a professional before drilling into
a surface other than stainless steel.
4
PROPER INSTALLATION SHOULD TAKE ABOUT 2-4 HOURS
center of hole to wall
"
2
Maximum counter
thickness (depth)
1 1 ⁄ "
2
that operates a food waste disposer.
1 1 ⁄ " - 1 1 ⁄ "
4 2
■ ■
Identify locations for the faucet and
tank.
■ ■
Check to make sure there is proper
clearance for faucet handle to be fully
opened.
■ ■
Check to make sure counter is not
too thick.
■ ■
Make sure there is a grounded
electrical outlet under the sink.
■ ■
Turn off water supply.
■ ■
If using the sink sprayer hose hole,
remove nut that connects sprayer
hose at bottom of faucet.
■ ■
Using adjustable wrench, remove nut
connecting sprayer washer flange in
sprayer hole.
■ ■
Plug hose opening with either a 1/8"
plug or a 1/4" cap (not supplied).
What if you don't have a sprayer hole or
don't want to use it?
■ ■
If drilling a hole into a stainless steel
sink or counter top, you can cut a
mounting hole for the faucet with a
hole saw for stainless steel, or you can
use a hole punch.