Rocket Fish RF-NBKPD Guia Del Usuario página 9

The message Rocketfish Wireless NB Keypad
appears on your computer screen
indicating your receiver is ready to synch
with your keypad.
To synch the keypad to the receiver:
1 Slide the power switch on bottom of the
keypad to the ON position.
2 Press the connect button on the
receiver. The LED turns on indicating the
receiver is ready to synch.
3 Press the connect button on the bottom
of keypad. The LED turns off indicating
the computer has detected the reciver,
the receiver and keypad are synched,
and the keypad is ready for use.
Note: You must press the connect button
on the receiver and keypad within 8 to
10 seconds of each other. If you do not,
the receiver automatically turns off.
RF-NBKPD
7