INNOBIZ musilia Modo De Empleo página 17

adapter provided.
- Unplug the device before handling or mainte-
nance. Make sure that it has been emptied of any
liquid or substance for diffusion.
- The device must only be powered using very low
voltage for safety reasons, which corresponds to
the device marking.
- If the power cable is damaged, it must be
replaced with a cable or special kit available from
the manufacturer or after sales support.
- Unplug the device whilst filling or cleaning.
- Do not put too much water. Observe the maxi-
mum filling level indicated by the mark on the
device. In case of surplus, empty the excess and
immediately wipe with a soft cloth the plastic
parts that may have been in contact with the
water and essential oil.
- Use a cloth dampened with water and white
vinegar to clean and descale your device. Then
17