ENGLISH
LOW CAPACITY WARNING:
If one LED on the Power Indicator begins to fl ash, the charge of Battery is
under 20% capacity and should be recharged soon.
The Battery of LITHIUM ION type, as in the other, does not have the memory
effect. Therefore, no need to discharge it fully before a new charge.The
LITHIUM ION type can handle hundreds of charge / discharge cycles.
The machine will not present a slow decline, gradually his power at work
area. To signal that the battery is at the end of its charge and to signal a new
charging, the power to the machine will drop quickly.
When the Battery is completely discharged, the Power Indicator will start
signal with 4 LEDs fl ashing.In this moment, REMOVE the machine Battery
and PUT to CHARGE as needed.
BATTERY PROTECTION:
To protect the Battery from damage and prolong its life, the battery circuit
will turn off itself, if there is overload or if the temperature to increase much
during use of machine. This may happen in extremelyhigh torque, binding
and stalling situations.
The Battery will begin normal operation when it cools down..
The Power Indicator will display 4 fl ashing LED lights if the circuitry tects a
momentary overload. In this moment, RELEASE the Trigger Switch. PRESS
the Power Indicator Button again to display the remaining charge.
80
BAT 2A / BAT 4A