Sounds And Alerts - smarter IKettle SMK20-UK Folleto De Instrucciones

Sounds and alerts

Light is off
OFF
The light ring will be off when the
product is in standby, not in use or
unplugged from the power source.
Blinking
WIFI
When turning the product on
at the power source, the light
ring will flash on and off while
the kettle wifi is initialising or is
attempting to re-connect to your
wifi network.
Static glow
ON
The light ring will glow when the
kettle is heating. A beep will sound
once complete. If you are using
Formula mode, it will continue to
glow until it has dropped to the
required temperature and sound
another beep upon completion.
14
Fast flashing and sounds
ERROR
If the light ring flashes very fast
repeatedly and consistent beep are
heard after the wifi has initialised,
this indicates a wifi error. The kettle
can still be used manually however it
should be sent back to the
manufacturer for repair.
Pulsing light and sounds
If the light ring pulses slowly and sounds
ERROR
a continuous beep it indicates an error
with the kettle water sensors. Use of the
kettle should be discontinued and sent
back to the manufacturer for repair.