Setting Force Value; Technical Features - Rebel BTR170 Manual De Instrucciones

Setting force value

The recommended setting force is dependent on the combination of information coming from the
insert parameters.
Insert parameters
Force
Maximum
Setting effort range
= Force to obtain
a good setting
Minimum
Stroke in
maximum thickness
Stroke in
minimum thickness

Technical features

Setting force (min - max) (kN)
Setting capacity
Maximum stroke
Weight of the tool
Weight of the battery (2,6Ah)
Battery
Environmental limitations of use
Vibration
IP degree of protection
Noise emission
32
C1: setting C2: setting
in max in min
thickness
thickness
Tolerance
Tolerance
( * > 18kN with appropriate accessory)
(*M10 with appropriate accessory set)
Sound pressure level, LpA : 71.1 dB(A)
Sound power level, LwA : 82.1 dB(A)
C1
Maximum thickness (C1)
C2
Stroke
Minimum thickness (C2)
3.00 –> 22.00*
Insert M3 to M10*
Stud M4 to M8
7.0 mm
2.1 kg
0.3 kg
Li-Ion / 14.4 V / 2.6 Ah
5°C - 40°C
Vibration amplitude: 0.672 m/s²
20