Mounting And Connecting; Attentions - koban KME Manual De Instrucciones

KME
Staircase time switch

Mounting and Connecting

1. Designed for easy installation in the electrical switch box, simply hook the
timer onto the railing and press until you hear "click". To remove, pull
down the catch located at the bottom of the timer to release.
2. The timeswitch allows connection with switch (with or without neon light).
a. Connect the wires as indicated in Diagram 2 for switch with neon and
Diagram 3 for switch without neon.
b. Turn the switch to
c. For countdown functions, turn the time knob to the desired countdown
period (from 1 second to 30 minutes).
d. Then, put the switch to
standby mode for countdown function.
e. Push the neon switch to activate the countdown function, powers turns
on. It will be off automatically according to preset time.
f. Total current for the neon should not exceed 50mA. If a neon carries
1mA current, then, should not connect more than 50 neon switch to the
countdown timeswitch.
g. For switch without neon, you can connect as many as necessary in
different location for easy controls.
3. When timeswitch is in countdown mode, there will be no interface by:
• Pushing the connected switch (both with or without neon switch)
• Turning the time knob to different countdown period.
4. To override the countdown period, turn the switch to
turns on. Then turn the switch to

Attentions

For emergency switch off power when it is in countdown mode, turn the
switch to , position, power turns on. Then turn the switch to
turn off power.
Instructions manual |
positions, power always on.
positions, power turns off. The timeswitch is in
6
positions to turn off power.
www.grupotemper.com
, position, power
positions to