Metra DP-3003 Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR PART DP-3003
GM Full-Size Trucks / SUV
KIT FEATURES
• ISO DDIN radio provision
• Textured to match the factory dash
KIT COMPONENTS
• A) Dash panel • B) Radio brackets • C) Snap in pocket • D) Blank plate • E) (2) panel clips
• F) (2) Washers (for use with the #8 x 3/4" HVAC relocation screws) • G) (8) panel clips
• H) (2) #8 x 3/8" Phillips pan head screws • I) (5) #8 x 3/8" Phillips truss head screws
• J) (2) #8 x 3/4" Phillips pan head screws • K) Climate control locater template
A B
G
METRA. The World's best kits.
'
s 1995-2002
DP-3003
C
D
H I
metraonline.com
™
Dash Disassembly ..................................................2
Kit Preparation ........................................................3
Kit Assembly ...........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wire harness: • 70-1858 • 70-1859 (amplified models)
Antenna adapter: • 40-GM10
TOOLS REQUIRED
E
F • Panel removal tool • Phillips screwdriver
• Rotary or similar suitable cutting tool
J K
CAUTION!
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
Table of Contents
All accessories, switches, climate controls panels,
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION