Publicidad
Idiomas disponibles
Idiomas disponibles
Important Safety Instructions
Read these instructions completely before using the Memory Saver and
save them for future reference. Before using the memory saver on a car,
truck, boat or other piece of equipment, read these instructions and those
provided by car, truck, boat or equipment manufacturer. Following all
manufacturer's instructions and safety procedures will reduce the risk of
accident.
This product is designed to be used only when a vehicle is turned OFF.
Do not use this product in conjunction with a 12V portable power supply
when the vehicle is turned on.
CAUTION:
When the vehicle's battery is removed and the Memory Saver is
used to connect the vehicle's OBDII port to a power source, the
vehicle's battery connection cables/hardware are live. Care must
be taken to secure the positive battery cable/hardware to prevent
arcing, damage or injury!
To prevent overloading of a vehicle fuse or other vehicle damage,
do not use the Memory Saver if the vehicle's current draw is 4 amps
or more when the vehicle is in a KEY OFF condition.
Vehicle systems often cycle after the vehicle is turned off. Such
cycling places demands on the vehicle's electrical system. Before
operating the Memory Saver, turn the vehicle's key to the OFF
position and wait for 25 minutes. Doing so will ensure that all
vehicle cycling is completed.
Operating Instructions
This product is designed for use in conjunction with a 12V portable power
Publicidad
