Solar ESA30 Manual De Usuario página 3

supply. The Memory Saver is designed as a vehicle preset memory
saver only. Do not turn the vehicle on when the Memory Saver product
is being used to connect a 12V portable power supply to the vehicle.
1. Verify your 12V power supply has an available accessory port
and that its internal battery voltage is high enough (> 12.4V) to
power the vehicle while the battery is being replaced.
2. With the vehicle turned OFF and all accessories OFF, connect
the Memory Saver's DC plug to the portable power supply ac-
cessory port. Verify that the red LED on the cable is illuminated.
This verifies that the Memory Saver is receiving power from the
portable power supply.
3. Plug the Memory Saver's OBDII plug into the vehicle's OBDII
port.
4. You may now disconnect the vehicle's battery without having
any loss of electronic presets.
Warranty
The ESA30 Memory Saver is guaranteed to be free from defects in
materials and workmanship for 90 days from the original date of
purchase – original purchase receipt required to obtain warranty.
This warranty is not extended to products that, in Clore Automotive's
sole judgment, have been misused, abused, modified or used for
unintended purposes from their original state.
To obtain service under this warranty, return your ESA30 Memory Saver
to the place of purchase, along with your dated sales receipt, for an
exchange.