Declaration Of Conformity - TFA 60.5004 Instrucciones Para El Manejo

Ocultar thumbs

Contenido

página de 19

/ 19
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

TFA_No. 60.5004 Anleitung

LIGHT TUBE

– LED-lamp with radio controlled projection clock

• With the SNOOZE/DIMMER sensor button is it possible to turn the lamp on or off.

• Is the lamp activated you can change brightness in three steps with the

SNOOZE/DIMMER sensor button.

• The projection clock and lamp can only be operated with power adaptor.

4.4 Reading of the alarm time, month and date, day of the week and the tem-

perature

• Press MODE sensor button in normal mode to show the adjusted alarm time,

the date, the day of the week and the temperature.

5. Battery replacement

• Open the battery compartment and insert 2 batteries 1.5 V AAA.

• Use alkaline batteries only. Observe correct polarity. Low batteries should be

changed soon to avoid the damage resulting from a leaking battery. Batteries

contain harmful acids. Wear protective glasses and gloves when handling with

leaked batteries.

Attention:

Please do not dispose of old electronic devices and empty batteries in house-

hold waste. To protect the environment, take them to your retail store or to

appropriate collection sites according to national or local regulations.

6. Maintenance

• Keep the instrument in a dry place.

• Do not expose the instrument to extreme temperatures, vibration or shock.

• Clean it with a soft damp cloth. Do not use solvents or scouring agents.

• Avoid placing the instrument near interference sources/metal frames such as

computer or TV sets.

•

If the unit does not work properly use a pin to press the RESET button in the

battery compartment.

7. Intended usage, exclusion of warranty, safety information

• The product is not a toy. Keep it out of reach of children.

• The product is not to be used for medical purpose or for public information,

but is determined for home use only.

• The specifications of this product may change without prior notice.

• No part of this manual may be reproduced without written consent of TFA

Dostmann.

• Improper use or unauthorized opening of housing will mean the loss of warranty.

19.04.2010

11:14 Uhr

Seite 7

LIGHT TUBE

– LED-lamp with radio controlled projection clock

8. Specifications

Radio controlled clock:

DCF-77 (77.5 kHz)

Temperature range:

-19°C...70°C (-2°F....158°F)

"Lo"=

temperature is under -19°C

"HI"=

temperature is over +70°C

Batteries 2 x 1.5 V AAA and AC/DC power adaptor (10V DC, 300 mA) included