Control Panel - Klarstein 10034654 Manual Del Usuario

EN
14
GETTING STARTED AND USE
1. Pull the unit outwards from the carton and place it on the floor.
2. Check if the spare parts are complete, same as the spare parts list.
3. lace the unit on the floor. take out the wheels to assemble.
4. Follow up the direction, then add water.
Notes
• Make sure the power cord is disconnected,and then pull out the water tank.
• Water level must be between the MIN and MAX line.
• After some time operation dust and dirt may occour in water tank .It is
recommended to change water and clean water tank frequently.
• Water shortage alarm, when the water level is lower than "MIN" level. Then the "Bi-
Bi" alarm sound can be heard and the corresponding indicator light flickers. After
adding water to the normal water level, the light is off. Then restart the cool function.

Control panel

℃
-
S
H
+