Operation; Inserting Batteries - Hammerhead HLFL01 Manual De Instrucciones

OPERATION

1. INSERTING BATTERIES

Open the battery compartment (7) and
insert batteries according to the polarity
symbols. Be sure to pay attention to
polarity.
2. ON-FLOOR APPLICATIONS
Turn on the unit with the ON / Off switch
(1). The lasers now project two lines at a
90° angle onto the floor. These projected
lines allow tiles to be laid precisely. The 90° square edge (4) makes it easy to
align the first floor tile.
NOTE:
If an uneven floor interrupts the laser lines, the tripod can be used to raise the
laser for better line projection onto the floor Use the level vials to adjust the
tripod levelling foot adjustments.
3. WALL APPLICATIONS
The laser beams also project very visible laser lines on walls. It is recommended
to use no more 10 feet from the wall. Level the instrument with its levelling feet
(5,6) according to the level vials (2). The level vials are back-lighted to guarantee
good visibility even in reduced ambient light.
FLOORING LASER 7