Operation - Hammerhead HLMT130 Manual Del Usuario

OPERATION

1. HOW TO CHARGE THE COMPACT LASER MEASURING TOOL
NOTE: The compact laser measuring tool is shipped partially charged; charge the
battery before first use.
Optimum performance can be reached by recharging the tool for approximately 2
hours after use. It is not recommended to recharge the tool for more than 24 hours
after each use.
a. Insert the USB interface of the USB charging cable into the USB port of a
USB wall charger (not included).
b. Open the dust cover and insert the charging plug into charging port on the
Laser Measuring Tool, making sure that they are properly connected.
c. Connect the wall charger (together with USB charging cable) to the power
outlet. The tool will turn on automatically. The battery indicator will begin
to flicker on the LCD display to indicate that the compact compact laser
measuring tool is charging.
d. When charging is complete, the full-battery indicator will appear on the
LCD display. Remove the USB charging cable from the measuring tool;
the tool will turn off within 3 seconds. If the USB charging cable remains
connected to the compact laser measuring tool, the tool will remain "ON".
NOTE: The compact laser measuring tool will not turn off when the USB charging
cable is removed during normal charging until 3 minutes have elapsed.
1
(NOT INCLUDED)
USB INTERFACE
COMPACT LASER MEASURING TOOL
CHARGING PLUG
CHARGING PORT
9