BUZZER OPERATION
According to the function, the buzzer sound is as follows.
Buzzer sound
Function
Peek
Selection
long beeps(4Hz)
long beeps(8Hz)
long beeps(2Hz)
NOTE
The buzzer function set automatically when the power is turned on after inserting new battery.
Buzzer function is changed by buzzer ON/OFF button.
The buzzer function can be selected by Buzzer ON/OFF
En
button and it will operate only if the buzzer mark appears
on the LCD panel.
Application
When you press Flash, Buzzer button
When Mode Dial is changed
Warning
When hand shake is detected
Warning
When AF Lock (shorter than minimum shooting range) occurs
When a film is loaded incorrectly
Warning
When the rewinding is completely finished
21