Connecting To A Wireless Network; Sharing Your Phone's Data Connection Via Usb - Huawei M886 Guia Del Usuario

7.2.2 Connecting to a Wireless Network

1. After turning on Wi-Fi, touch
2. Touch Wireless & networks
networks in the Wi-Fi networks section.
3. Touch a Wi-Fi network to connect to it.
• If you select an open network, you will be automatically connected to the
network.
• If you select a network that is secured with Wired Equivalent Privacy (WEP)
and connect to it for the first time, enter the password as prompted, and then
touch Connect. If you connect to a secured wireless network that you have
already used, you will not be prompted to enter the password again unless you
have reset your mobile phone to its default settings.
On the Wi-Fi settings screen, touch Add Wi-Fi network to add a new Wi-Fi
network.
7.2.3 Sharing Your Phone's Data Connection as a Portable
Wi-Fi Hotspot
1. Touch > Settings.
2. Touch Wireless & networks > Tethering & portable hotspot.
3. Select the Portable Wi-Fi hotspot check box to share your data connection.
When Portable Wi-Fi hotspot is selected, you can touch Portable Wi-Fi
hotspot settings to change its network name or secure it.

7.2.4 Sharing Your Phone's Data Connection via USB

To use USB tethering in different operating systems, you may need to prepare your
computer to establish a network connection via USB.
You cannot share your mobile phone's data connection and access its microSD
card via USB at the same time.
1. Touch > Settings.
2. Touch Wireless & networks > Tethering & portable hotspot.
3. Select the USB tethering check box to share your data connection.
> Settings.
> Wi-Fi settings. You will see a list of detected Wi-Fi
37