Connection; Basic Operation; Playing Advd Or Vcd Disc - Proline DVDP762WX Manual De Instrucciones

Connection

1. Connect the single-connector end of the audio/video cable (not supplied) to the AV
OUT jack of the unit.
2. Connect the triple-connector end of the audio/video cable to the
corresponding jacks of the TV display.
Match the color of the AV cable with the jacks of TV display. The yellow cable
is for the yellow video jack, the red/white cable is for the red/white audio jacks.

Basic Operation

Buttons on the unit function the same as the corresponding buttons on the remote
control.
Playing a DVD or VCD Disc
1. Slide the power switch on the DVD player to the ON position. The blue power
indicator comes on.
2.
Press the eject button
disc in the tray, with the label side facing up
3. Close the tray. Play starts automatically.
4. Turn the VOLUME knob to adjust the desired volume.
5. To interrupt playing, press
6. To stop playing, press
playback, press
Press MENU/PBC to return to the menu screen. Some discs do not support
7.
menus and start to play automatically.
Notes:
1. If parental control is set and the disc isn't fit for the rating setting you must input the
password. (See "Parental
2. DVDs may have a region code. Your player does not play discs that have a region
code different from your player.
●Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a disc has more than one track,
you can move to another chapter/track as follows:
1. Press or
2. To go directly to any chapter / track during playback, input the chapter/track
number. If the track / chapter number is greater than 9, use the 10+ button to
enter the first digit then use the numeric buttons to enter the second digit.
on the unit to open the disc tray and insert your chosen
. To resume playing, press
. Press
twice.
Ctrl").
DVD
briefly during play to select the next or previous chapter/track.
.
to resume playing. To complete stop the
9
again.