Intellinet Network Solutions 524438 Guía De Instalación Rápida página 4

6. When the Ready to install the program screen displays, click "install. " to
change any previous selections/settings, click "Back"; to exit the wizard,
click "cancel. " NOTE: if the Found new hardware Wizard screen displays
again, wait until the installshield Wizard complete screen displays.
7. When the installshield Wizard complete screen displays, click "Finish. "
WIRELESS AP cONNEcTION
the configuration utility is a powerful application that helps you configure
the adapter and monitor link status and statistics during the communication
process.
1. once the adapter's installation process is complete, the icon for the
wireless configuration
utility will automatically
appear on the computer
desktop and at the
lower-right corner of the
system tray. Right-click the icon and select the configuration utility or
switch the adapter to ap mode (refer to the user manual for details).
2. the configuration utility will scan for wireless access points and access any
unencrypted wireless access points automatically. to connect to one,
highlight it and click "connect. " NOTE: if a wireless access point you want
to connect to doesn't appear in the ap list field, click "Rescan. "
3. if the wireless access point uses encryption, you need to input a WEp key
or Wpa preshared key. obtain it from the owner of the wireless access
point you want to connect to, enter it in the corresponding text field, and
4
4
English