SATA 05211 Manual Del Uso página 10

中文
EN DE RU KO PT JA ES
05211/05212
3）Allow glue to cool before handling object or surface.
TIP: Manufacturer also supplies glitter and colour sticks for decorative purposes. These sticks have been specially developed for creative
projects and low temperature （105 ° C）.The colour sticks can also be used for sealing decorations. To beable to quickly change
colours, it is recommended to cut the sticks into 3cm pieces before inserting into the Glue Gun.
Mucosity70% Semi Transparent07*100mm
Mucosity 80% Transparent07*100mm
Mucosity70% Semi Transparent 011*150 mm
Mucosity 80% Transparent 011*15Omm
DRIP-CONTROL FUNCTION:
When heated up, the glue gun has a drip-control function. This prevents the glue from dripping when the glue gun is at operating
temperature.
NOTES: During heating-up the glue gun may release a few drops of glue.Do not use glitter or colour sticks at high temperature. The drip-
control function will not work properly.
Model: EXCHANGE NOZZLE:
Use a spanner and turn the nozzle from the housing.
Mount a new nozzle on the housing.
CHANGE GLUE STICKS:
Do not attempt to remove the unused portion of the glue stick from your glue gun. If you need to switch glue stick formulas, empty the
melting chamber by squeezing the trigger and insert new formula.
STAND/KICK STAND:
When glue gun is hot, do not lay on its side. Always use stand.
1 ）Press the stand （4） if you are not using the glue gun （model 05211） for the time being.
2）Press the stand release wrench （8） and lower the stand （model 05212）. When saving or reusing, return the stand to the
starting position.
MAINTENANCE:
CLEANING:
before any work on the unit itself, pull the mains plug.Always keep the unit clean so that it functions properly and accurately.
SERVICE AND WARRANTY:
This product is guaranteed in accordance with statutory/country specific regulations; damage due to normal wear and tear, overload or
improper handling will be excluded from the guarantee. If the unit should fail despite the care take in manufacturing and testing, send it
undismantled together with proof of purchase to your dealer.
10