Mounting And Getting Started; Finding Out Preconditions; Function Test - Novero LTE 800 MIMO Manual De Instrucciones

Mounting and getting started

Before installation
Please check the supplies for completeness.

Finding out preconditions

To ensure you to get a sound LTE signal please ask your mobile radio provider
where the nearest transmitter mast is located in the surroundings of your home.
Now lay down the position of the antenna in the outdoor or indoor area.
You have two different installation variants for your active antenna:
Antenna outside on the house
The LTE antenna À is mounted to the house wall with the enclosed mounting
bracket .
Antenna on an antenna mast
The LTE antenna À is mounted to the antenna mast with the enclosed mounting
bracket  and the loop clamps .

Function Test

1. Find out where the transmitter mast is located in relation to the antenna.
2. Align the antenna approximately; the logo should point to the location of the
transmitter mast. An angular deviation of 30° is possible [when mounting to a
mounting bracket].
3. Now use the software and the hardware of the mobile ‚phone provider to start up
PC or notebook.
20