Auto Ventshade VV117 Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 4 Piece Set
Front Driver
Side Visor
Contents - 6 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the window frames with an alcohol pad and dry
1 1
Installation Instructions
Ventvisor Deflector
NOTE: Actual product may vary from illustration.
Front Passenger
Side Visor
Front Passenger
Side Visor
NOTE: Actual application may vary slightly from illustrations.
with a soft cloth.
Rear Driver Side
Rear Passenger
Side Visor
Rear Driver
Side Visor
Rear Passenger
Side Visor
Clean Towel
Peel back 2" (5cm) of tape liner from rear end of top flange. En-
sure free end is accessible. Remove tape liner from front flange.
free end
rear flange
1 1 2
Page 1 of 3
I - Sheet Number VV117 Rev.A
Visor
Alcohol Pad x4
Ext. Rear Driver
Side Visor
Ext. Rear Passenger Side
Visor
top flange
front flange
Alcohol Pad x6