Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EngliSh
1
4
Remove the protective screen in front of the UV light bulb.
To remove the screen, gently lift it up (1) and pull it out (2).
Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the metal clasp.
6
Clean the protective screen and the UV light bulb with a damp cloth.
7
Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light bulb with the metal
clasp and push the bulb into the clasp.
8
Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen with the slots on the
reflective surface near the UV light bulb. Then insert the pegs into the slots
and slide down the screen to secure it in the sanitizer.
Storage
-
If you are not going to use the product for an extended period of
time, unplug it from the electrical outlet, clean it and store it in a cool
and dry place away from direct sunlight. You can use the cord wrap to
store the power cord in an organized manner.
-
You can store brush heads on the pegs at the back of the charger.
replacement
Brush head
-
Replace Sonicare brush heads every 3 months to achieve optimal
results.
-
Use only Sonicare ProResults replacement brush heads.
UV light bulb
-
Replacement UV bulbs are available through your Sonicare Customer
Service Center in North America by calling 1-800-682-7664. Outside
North America, contact your local Philips Customer Care Center.
disposal
-
The rechargeable battery inside your Sonicare cannot be replaced, but
is easy to remove for recycling. At the end of product life and prior to
disposal, please remove the rechargeable battery from the handle by
following the instructions below.
-
Do not throw away the appliance or the UV light bulb (bulb contains
mercury) with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you
help to preserve the environment.
-
If you have any recycling questions, contact your local waste
management office.
removing the rechargeable battery
Please note that this process is not reversible.
-
To remove the rechargeable battery, you need a flat-head (standard)
screwdriver. Observe basic safety precautions when you follow the
Publicidad
Tabla de contenido
