Publicidad
Idiomas disponibles
Idiomas disponibles
5. Please give me an explanation of all the LEDs and Buttons.
LED/Button
Wireless/WPS LED
WAN Link/Act LED
1
2
3
4
WAN Link/Act LED
(Ports 1-4)
Status LED
Reset/WPS Button
If you still encounter problems or have any questions regarding the
TEW-659BRV, please contact TRENDnet's Technical Support Department.
Color
Sequence Definition
Blinking
Green
N/A
Off
Solid
Green
Blinking
N/A
Off
Solid
Green
Blinking
N/A
Off
Green
Blinking
Green
Solid/Off
N/A
N/A
Ÿ Wireless LAN is on or enabled/Wireless
data transmission
Ÿ WPS is activated (Blinking rapidly for 2
minutes)
Wireless LAN is off or disabled
WAN port is connected at 10/20Mbps or
100/200Mbps (Half/Full Duplex)
WAN port data transmitting/receiving at
10/20Mbps or 100/200Mbps (Half/Full
Duplex)
WAN port is disconnected/No Ethernet Link
LAN port connected at 10/20 Mbps or
100/200Mbps (Half/Full Duplex)
LAN port data transmitting/receiving
10/20Mbps or 100/200Mbps (Half/Full
Duplex)
LAN port disconnected/No Ethernet Link
Device is ready
Device is not ready
Reset: Hold 20 seconds to reset device to
factory defaults. WPS: Hold 3 seconds to
activate WPS.
9
Publicidad
