Intended Use - Viega Advantix 4965.30 Manual Del Usuario

Instruction for use Advantix-Visign SR1 / SR2 / SR3 / SR4 standing grate
GB

Intended use

The Visign SR1 / SR2 / SR3 / SR4 standing grate may only be mounted in Viega
Advantix Vario shower channels model 4965.10 and 4966.10
Further information can be found in the instruction for use Advantix Vario shower
channel.
A
Model Art.-No.
4965.30 686 284
4965.31 686 291
4965.32 711 870
4965.33 711 887
B
Assembly steps
 Remove polystyrene insert.
 Lie the grate holder on the
adjusting screw and adjust
to the tile height.
Max standing grate height,
20 mm above the drain
flange, using natural stone
set / Art.-No. 686 321 30 mm.
 Shorten and deburr the
standing grate.
Do not shorten the standing
grate using a circular saw
(angular grinder).
 Apply sealing caps.
The sealing caps can be
adjusted by up to 9 mm.
560884_Stegrost.indd 14
Product description
Visign SR1 standing grate,
with assembly accessories and
sealing caps - in matt
Visign SR2 standing grate,
with assembly accessories and
sealing caps - shiny
Visign SR3 standing grate,
with assembly accessories and
sealing caps - black
Visign SR4 standing grate,
with assembly accessories and
sealing caps - white
 Insert sieve.
 The upper edge of the grate
holder must be approx.
1 mm below the upper
edge of the tiles.
 Fasten the grate support to
the grate. Positioning:
Grate length 3 x 1/3 the
standing grate length.
 Adjustment option for
sealing caps.
14
 Insert adjusting screw.
 Calculate the length of the
standing grate.
 Insert standing grate.
16.09.2014 10:52:54