Essick Air Hygrometer Manual De Instrucciones página 5

Use of the flip stand
Flip out the plastic stand on the rear of the thermometer
for table standing. Stand the thermometer on a flat
surface.
Wall-mounting the thermometer
Follow these steps to mount the thermometer on the
wall:
1. Drive a #4 round head self-threading screw (check to
make sure head size fits the hole in rear of
thermometer), into the wall at the desired location
until the head extends 3.5mm (1/8 inch) from the wall.
2. Locate into the hanger slot on the back of the
thermometer until it locks into place.
Display/Mounting of Unit