Use; Cleaning And Maintenance - Imetec 5901 Instrucciones De Uso

on the filter with the triangle (▲) on the container (6) [Fig. G].
• Insert the auger (3) into the stainless steel filter (4) by pressing and turning lightly
until a click is heard [Fig. H]. Note: the cover cannot be fitted on if the auger is not
completely inserted in position.
• Insert the hopper (2) on the container (6) by aligning the open padlock (
arrow on the container (▲) [Fig. I] and rotate the hopper (2) clockwise to align the
closed padlock ( ) with the arrow on the container (▲) [Fig. L].
• Placethe container for the juice (17) in front of the dispensing nozzle (8) and the
container for the waste (18) in front of the waste outlet (20).
ATTENTION!
DO NOT use this appliance if there are visible signs
of damage.
Proceed as follows after having assembled the appliance:
• Insert the plug (15) in the socket.
• The display (9) indicates speed 3.
• The drip cap (7) may be left in the closed position if you wish to extract juice from various
types of fruit and vegetables. In this case do not allow the juice to exceed the maximum
quantity indicated on the container, as it might leak out.
• Select the desired speed (1-2-3) by pressing the speed button (11).
• Start the appliance by pressing the ON/OFF button (10).
• Place the food inside the hopper (2).
• After adding the last ingredient, let the juicer operate until all the juice obtained is fed out
of the container.
• Switch the appliance off by pressing the ON/OFF button (10).
• If the food should stop in the hopper press it gently with the presser (1).
• Disconnect the plug (15) from the socket.
• Immediately clean the parts that have come into contact with food as described in the
CLEANING AND MAINTENANCE chapter.
After using the appliance, clean it immediately to prevent the food from clogging the
stainless steel filter (4) when it dries.
ATTENTION!
NEVER wash the removable parts in a dishwasher.
Always pull the plug out of the electric power socket
before cleaning or maintenance.
• Place the container for the juice (17) in front of the dispensing nozzle (8) and the
container for the waste (18) in front of the waste outlet (20).
• Select the self-cleaning function by pressing the speed button (11) until the display
shows the symbol [ ] moving.
• Start the appliance by pressing the ON/OFF button (10).

CLEANING AND MAINTENANCE

USE

EN
) with the
19