Storing And Caring For The Product; Troubleshooting - Imetec 5901 Instrucciones De Uso

• Pour water inside the hopper (2).
• The self-cleaning function will last about 30 seconds after which the appliance will stop
automatically.
• Disconnect the plug (15) from the socket.
EN
• Release the hopper (2) from the container (6) by rotating it anti-clockwise.
• Remove the container (6) from the motor casing (14) by rotating it anti-clockwise.
• Remove the filter (4) with the auger (3) inserted.
• Tilt the filter (4) and remove the auger (3) and then the mixer drum (5) [Fig. N].
• Clean the dry dispensing nozzle under a jet of water by opening the silicone flap [Fig. O].
• Wash the removable parts: the presser (1), the hopper (2), the auger (3), the stainless
steel filter (4), the mixer drum (5), the container (6) and the juice and waste juice
containers (17-18) by hand.
• Clean the stainless steel filter (4) outside and inside with the brush supplied (19) [Fig. P].
• Never immerse the washable parts in water hotter than 60°C.
• Clean the motor casing (14) with a damp, well-wrung sponge.
• Dry with a dry cloth.

STORING AND CARING FOR THE PRODUCT

ATTENTION!
appliance, make sure it has completely cooled down
before putting it away.
Should one of the problems indicated occur, adopt the proposed solution:
Problem
The food continues to turn in the
filter (4) and is not extracted.
Excessive pulp is accumulated in
the filter (4).
The appliance does not work.
Juice comes out from the bottom
of the container (6).
The hopper (2) does not close.
20
After having

TROUBLESHOOTING

Press the CONTRAST button to invert the direction of
rotation and free the auger from food.
Disassemble the filter (4) and auger (3) between one
juice extraction and another and clean them from
residue. Resume the process.
Alternate fibrous vegetables such as carrots with
softer food.
Close the hopper (2) tightly.
Fully close the silicone lever at the rear of the
container.
Check the assembly of all the parts: container (6),
filter (4) and auger (3).
finished using
Solution
the