Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
12
ASSEMBLY
(a) Remove the protective caps from the axle ends.
(b) Slide the wheels onto the axles. You will hear a snap sound.
(c) Insert the drawbar into the connector on the chassis and rotate it to the
desired position:
•
Hand trolley mode: the drawbar points upwards at 90°.
•
Bicycle trailer mode: The drawbar points at an angle of 45° to the side.
(d) Insert the two locking pins through the holes to secure the drawbar to the
chassis. Use spring clips to secure the connection.
1
3
2
4
Publicidad
Tabla de contenido
