Fixing In Place; Use; Clamping And Releasing A Workpiece; Cleaning And Care - Powerfix Profi+ Z29760B Instrucciones De Utilización Y De Seguridad

Fixing in place / Use / Cleaning and care

Fixing in place

Q
1. Place the vacuum base vice down on to a suitable flat, smooth
surface.
2. Turn the suction pad lever
to fix the suction pad
Note: If you fix the suction foot
edge of the bench, you will be able to clamp long workpieces
vertically to work on their ends.
j
T urn the suction pad lever
pad .
7

Use

Q

Clamping and releasing a workpiece

Q
1. Turn the vice into the desired position and fix the ball joint
in position with the ball joint tommy bar
2. To open the jaws
anticlockwise.
3. Place the workpiece between the jaws
turning the vice jaws tommy bar
workpiece is tightly clamped.
j
Y ou can now work on the workpiece.
j
A fter completing work on the workpiece, release it by turning
the vice jaws tommy bar

Cleaning and care

Q
j
C lean the product with a dry, fluff-free cloth.
j
N ever use aggressive or corrosive cleaning agents, as they
may damage the product.
anticlockwise as far as it will go
5
in place.
7
7
clockwise to release the suction
5
turn the vice jaws tommy bar
2
3
anticlockwise.
3
in place directly at the
.
8
3
and clamp it by
2
clockwise. Ensure that the
6
GB/MT 23