Frequently Asked Questions - Wiseup WIFI07 Guia Del Usuario

3. If the camera shows"Connected" on thehomepage, it means the password has been
changed successfully. If it shows "Wrong Password", then you need to reset the pass-
word.
X. Charging the Backup Battery
10.1. Put the backup battery in place then connect the camera to an outlet AC power
supply by using the charging adapter and USB cable provided.
10.2. The Battery Charge Indicator Light will be illuminated yellow during the charging
process.
10.3.It will take 8 hours to obtain a full charge for the backup battery.
10.4. The Battery Charge Indicator Light will turn off when the backup battery is fully
recharged.

Frequently Asked Questions

Q: Why can't I find the camera's WIFI signal on my iPhone or iPad?
A: There are 4solutions to this problem:
1. Take out the backupbattery, plug the camera into an outlet power supply by using the USB
cable provided. Wait 2 minutes for the WIFI signal SSID to appear.
2. Reset the camera (See VIII),then wait for the WIFI signal SSID to show up.
3. Keep your iPhone or iPad within the camera's WIFI hotspot range, refreshing the WIFI
signal page. It may take up to 2 minutes for the hotspot to become recognizable on your
iPhone or iPad 's WLAN setting page.
4. Shut off your iPhone or iPad's WLAN function for a while, then turn it on to search again.