XD P330.651 Manual Del Usuario página 4

DEvICE aCtIvatE & CHarGE
• Charge this product for minimum 30 mins before using it.
• Make sure that the product is charged in order to work properly. Once the device has
low battery status, charge the device with the Micro USB cable.
Before connecting with the App; please make sure the Bluetooth connection of your
mobile device has been enabled. To use Navigator Sport APP, make sure your mobile
device is connected to the internet via Wi-Fi/4G/3G.
APP installation
Download Navigator Sport on App store/Google Play store. This product is compatible
with Apple IOS 9.0 and up or with Android 4.4 and up (most common models).
Pair the device
Hold the power button (5) of the product until the LED indicator (4) is flashing blue
and red light (see components of this product above). You will hear "power on" and
then "ready to pair".
1. Open the settings in your smartphone and enable your Bluetooth settings
2. Search for the device called "Navigator 1 Pulse" to pair like below. Once connected,
you will hear "your device is connected". This means your device has been connectedly
successfully.
Note: please keep this product near the phone while pairing and turn on the Bluetooth.
If there is no devices showing up, please delete all the shown devices and try again
to connect. Please note: the
screenshots below differs from
versions of the App due
updates of the new versions.
4