Cleaning And Maintenance - Concept Perfect Clean CP 1010 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 129

CLEANING AND MAINTENANCE

Cleaning After Use
CAUTION: To avoid burn injury, do not refill water tank before steam cleaner has cooled completely. Be
careful when removing water fill safety cap. Even when cap is able to be turned the steam cleaner may still be
hot, especially the metal surfaces.
IMPORTANT: Make sure safety cap is tightened securely before use or for storage.
1. After the steam cleaner is used, press the power button to turn power "OFF" and then unplug the power
cable from wall outlet.
2. Press down the steam trigger to release all pressure.
3. It takes about 7-10 minutes to the steam cleaner to cool down, the safety cap will drop totally. If it do
not drop after 10 minutes, release the remaining pressure by pressing the steam discharge button
again. Turn clockwise to unscrew the filler cap and remove the cap gently. DO NOT EXCEED THE FILLING
OF THE FILLING HOLE. Allow the steam cleaner to cool for another 5 minutes. After the steam cleaner has
cooled down and the pressure is reduced in the appliance, the filler cap will easily release. Fully unscrew
the filler cap.
4. Empty the water tank and let it dry. Dry the outer surface of the steam cleaner with a dry cloth. Allow
it to dry freely. Then fit the cap on and screw it firmly in the clockwise direction.
5. DO NOT OVERTIGHTEN THE SAFETY CAP.
Cleaning microfiber cloth:
1. Cloth is washable. Always use a mild detergent.
2. For best results, let the cloth to dry.
IMPORTANT: Allow the steam cleaner to fully cool down before performing any maintenance or troubleshooting
checks.
IMPORTANT: Never use bleach or fabric
STORAGE
1. Remove the power cord from the socket.
2. Press down the steam trigger to release all pressure.
3. It takes about 7-10 minutes to the steam cleaner to cool down, the safety cap will drop totally. If it do
not drop after 10 minutes, release the remaining pressure by pressing the steam discharge button
again. Turn clockwise to unscrew the filler cap and remove the cap gently. DO NOT EXCEED THE FILLING
OF THE FILLING HOLE. Allow the steam cleaner to cool for another 5 minutes. After the steam cleaner has
cooled down and the pressure is reduced in the appliance, the filler cap will easily release. Fully unscrew
the filler cap.
4. Empty the water tank and let it dry. Dry the outer surface of the steam cleaner with a dry cloth. Allow
it to dry freely. Then fit the cap on and screw it firmly in the clockwise direction.
5. DO NOT OVERTIGHTEN THE SAFETY CAP.
6. Leaving a solution residue in the cleaning agent tank will not affect future performance.
7. Store upright in a protected, dry area. Keep water funnel and measuring jug for future use.
C P 1010
EN
83

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido