Using The Speaker; Power On/Off - Impecca ASB-110BT Manual Del Usuario

ON OTHER CELL PHONES/DEVICES
• Review the instruction manual that came with your phone/
device.
6. When your Bluetooth enabled device finds the speaker, select
"ASB-110BT" from the list of found devices.
7. If required, enter the password 0000 (i.e. four zeros) and se-
lect OK or YES to pair the two units.
8. A tone will sound indicating a successful pairing. The Blue-
tooth LED indicator light will remain solid, indicating that you
are now connected.
NOTE: If you would like to connect the speaker to another device,
you must disconnect the speaker from the currently paired device
first. On your device's Bluetooth settings, select "ASB-110BT" then
select "disconnect" or "unpair". When the speaker has been un-
paired, repeat the pairing process with the new device.
NOTE: The screenshots above are typical of many Bluetooth en-
abled devices in the market today, and are used to assist in the
explanation of the pairing process. Your Bluetooth enabled de-
vice's interface and interaction with the speaker may differ slightly
from the illustrations shown.

USING THE SPEAKER

POWER ON/OFF

Turn the speaker On and OFF by pressing the [ POWER ] button
on the unit or the [  ] key on the remote.
–9–