Lagos Paint TROTTER REFINISH Manual De Montaje Y Utilización página 21

ENGINE ROTATION CHECK
The engine rotation can be checked in several ways, but
the simplest and most practical way is to locate the en-
gine in the cabin (located on one side above the con-
trol panel) and to visually check the direction of rotation.
The engine is fitted with a red sticker that show the correct direc-
tion of rotation.
To check the current direction of rotation, it is necessary to obser-
ve the rotation of the blades through the motor housing. In order
to capture this movement, it is enough to switch on the equip-
ment, and once the rotor begins to rotate, disconnect the power
supply so that this movement is easily appreciable.
If you want to vary the engine direction of rotation, it
is necessary to invert two of the phases (Three-pha-
se engine). In the case of the picture it would be neces-
sary to change the phase U to W (black wire and grey
wire respectively) to reverse the direction of rotation.
Please unplug the paintTROTTER from the
network befor making any modification.
21