Removing The Appliance - Gaggenau AR 400 741 Instrucciones De Instalación

2 The appliance has rubber feet, fixing not required.
3 Fasten the appliance to the wall using
Alternative:
four screws.
Note: Align the appliance horizontally.
4 Secure the exhaust air pipe to the connecting piece
and seal appropriately.
8
5 Connect the remote fan unit to the downdraft
ventilation using the 6-pin plug. The plug must snap
into place. If necessary use the extension cable
included with the appliance.
Note: Only use the extension cable supplied with
the unit.

Removing the appliance

Disconnect the connecting cable of the appliance. Undo
the exhaust connections. Pull out the appliance.