Sunrise System SRS 320 Manual De Usuario página 7

light down from maximum brightness to fully off. SUNSET is initiated when the alarm is activated
and the light is on. If the light is already off then the Sunset will not occur. Press the MENU (M)
button to continue or press zZ (SNOOZE) to exit the menu. If 0 is selected the sunset feature is
disabled.
Setting the LCD Backlight
Press the MENU (M) button until the display shows BACKLIGHT and a number (backlight mode)
0 to 4 will also be displayed. Press the + (PLUS) or - (MINUS) buttons to change the backlight
setting, there are five possible choices:
0 - Backlight is always off
1 - Backlight is always lit dimly
2 - Backlight is always lit brightly
3 - Backlight illuminates at full brightness for 5 seconds at any button press, after which the
backlight will go off
4 - Backlight illuminates at full brightness for 5 seconds at any button press, after which the back-
light will be dimly lit
Press the MENU (M) button to continue or press zZ (SNOOZE) to exit the menu.
Setting the Calendar
At any time when setting the calendar, pressing the ALARM button will change the date display
format.There are two possible settings to choose from:
31/12/2008 (DD/MM/YYYY)
12/31/2008 (MM/DD/YYYY)
Setting the Calendar Year
Press the SET button until the display shows YEAR, after 2 seconds the current date will be
displayed with the selected option flashing. Press the + (PLUS) or - (MINUS) button to adjust the
year. Press the SET button to continue or press zZ (SNOOZE) to exit the menu.
Setting the Calendar Month
Press the MENU (M) button until the display shows MONTH, after 2 seconds the current date
will be displayed with the selected option flashing. Press the + (PLUS) or - (MINUS) button to
adjust the month. Press the MENU (M) button to continue or press zZ (SNOOZE) to exit.
Setting the Calendar Date
Press the MENU (M) button until the display shows DATE, after 2 seconds the current date will
be displayed with the selected option flashing. Press the + (PLUS) or - (MINUS) button to adjust
the date. Press the MENU (M) button to continue or press zZ (SNOOZE) to exit the menu.
Setting the LCD contrast
Press the MENU (M) button until the display shows CONTRAST, a number (contrast level) 1 to
16 will also be displayed. Press the + (PLUS) or - (MINUS) button to adjust the contrast setting,
there are 16 settings to choose from: 0 = faint to 16 = dark. Press the MENU (M) button to
continue or press zZ (SNOOZE) to exit the menu.
Setting the Security Mode
Please Note: If SECURITY feature is enabled some features will become locked out (not in use).
Press the MENU (M) button until the display shows SECURITY ON or SECURITY OFF. Press the
+ (PLUS) or - (MINUS) button to change the setting.The SECURITY (house) symbol will be
displayed when the SECURITY mode is enabled to remind you that this feature is activated. When
7