Sunrise System SRS 320 Manual De Usuario página 8

the SECURITY mode is enabled the SRS 320 will switch the light on and off at random times
between 19:00 (7.00pm) and 09:00 (9.00am).The SECURITY mode will light your home at
random times giving the impression to unwelcome 'visitors' that the home is occupied.
Press the MENU (M) button to continue or press zZ (SNOOZE) to exit the menu.
Setting the Night Light On or Off
Press the MENU (M) button until the display shows N-LIGHT ON or N-LIGHT OFF. a light
symbol will be visible on the display to remind you that night light mode is on.This feature is used
in conjunction with the NIGHT LIGHT level setting. Press the + (PLUS) or - (MINUS) button to
change the setting. Press the MENU (M) button to continue or press zZ (SNOOZE) to exit.
Setting the Night Light Level
Please Note: This setting is only available if the NIGHT LIGHT is set to ON.
Any variation in the tone of the LEDs when dimmed is normal.
The night light feature enables you to configure the SRS 320 to fade the light down to a user
defined level when the alarm is activated. Press the MENU (M) button until the display shows
NIGHT LEVEL, the light will also illuminate at the set night light level. Press the + (PLUS) or -
(MINUS) button to adjust the desired light level. Press the MENU (M) button to exit the menu.
Using as a Reading Light
Please Note: If SECURITY mode is enabled this feature is unavailable.
The reading light level can be adjusted by pressing the + (PLUS) or - (MINUS) button, the light
box can be switched to full brightness or instantly off by pressing the zZ (SNOOZE) button. The
display will show LAMP ON or LAMP OFF for 2 seconds.
Using the Timer
Ensure the Alarm and Security Mode are OFF. Press the TIMER (T) button.The display will show
the timer value i.e. 10.00, press the timer button again to increase the timer value up to 90
minutes.The light will come on and the timer will count down. Press the zZ SNOOZE button to
cancel the timer.
Operating Mode Button Functionality
Button
MENU (M)
Alarm
+
-
zZ (SNOOZE)
Timer
Button
MENU (M)
ALARM
+
-
zZ (SNOOZE)
Timer
Idle Mode
Enter programming (Set Up) Menu
Alarm On or Off
Light +
Light -
Light On or Off / Snooze
Set Timer Value
Programming (Set Up) Menu Mode
Advance to the next Menu option (see programming table overleaf)
Change Time and Date display format
Increase selection / Night Light +
Decrease selection / Night Light -
Exit Set Up Menu
No Action
8