General Safety Instructions; Work Area Safety; Personal Safety - Facom NS.3500G Manual Del Usario

EN
The NS.3500G, NS.3100G, NS.2500G impact Wrenches are precision-built tools, designed for driving, tightening and
loosening threaded fasteners, usually nuts and bolts, when fitted with a suitable impact socket.
Do not use damaged, frayed or deteriorated air
hoses and fittings.
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions may
be harmful to your hands and arms. Stop using any
machine if discomfort, tingling feeling or pain occurs.
Seek medical advice before resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not
overreach when operating this tool.
Do not use the tool under the influence of drugs,
alcohol, medication or if you are tired.
Do not over-oil and do not use heavy grade oil
as stalling and low performance may result.
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS MANUAL
INTO THE HANDS OF THE OPERATOR. FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD

GENERAL SAFETY INSTRUCTIONS

Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As
appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or
workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The
dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high
intensity noise may cause hearing loss. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if cutting
operation is dusty.
WARNING: Read all safety warnings and all instructions. Failure to follow the warning and instructions may result in electric shock, fire and
or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

1- WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents. Be aware of your surroundings, slippery surfaces
caused by the use of this tool and also of trip hazards caused by air lines.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
• Do not use in wet conditions.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2 - PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result
in serious personal injury.
• Prevent unintentional starting. Ensure the trigger is in the off position before connecting to air source, picking up or
carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch
on invites accidents.
• Exposure to high noise levels can cause permanent, disabling hearing loss and other problems, such as tinnitus
(ringing, buzzing, whistling, or humming in the ears). Therefore, a risk assessment and the implementation of
appropriate controls for these hazards are essential. Appropriate controls to reduce the risk may include actions such
as damping materials to prevent workpieces from ringing.
NU-NS.3500G-NS.3100G-NS.2500G_0118.indd 9
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
RESULT IN INJURY.
Use protective equipment such as glasses, gloves,
safety shoes as well as acoustic protection.
Always wear suitable CE marked eye protection
when operating or performing maintenance on this
tool.
Remain vigilant, use common sense and pay
attention when using the machine.
Always wear suitable respiratory protection when
operating this tool.
Always turn off the air supply and disconnect
the airsupply hose before installing, removing or
adjusting any accessory on this machine, or before
performing any maintenance on this tool.
Operate at 90 psig (6,2 bar / 620 kPa) Maximum
pressure.
6.2 bars
(90 psig/
620 kPa)
SAVE FOR FUTURE REFERENCE.
9
08/01/2018 08:10:24