AGB OPERA BIT SPRINT Guía De Usuario página 9

4. How to programme the cards to the wall reader
For every lock you can match a maximum of 50 Guest Cards and 50 Operator Cards.
Guest Card activation
1. Approach the Activation
Card to the reader. The
module will start to flash
with green colour.
Note. The opening with the Activation Card
happens when you approach twice the card in
front of the wall reader.
2. Approach a Neutral Card
to the reader in 8 seconds
from the flash of the green
LEDs.
3. The new Guest Card is
now authorised to open the
reader, up to an eventual
cancellation.
List cancellation from the Guest Card
How to disable all the Guest Cards which are
connected to the reader
1. Approach the
Cancellation card
to the wall reader.
* The cards that have been cancelled can be re-programmed in the same lock or in other ones.
Operator Card activation
*
List cancellation from the Operator Card
How to disable all the Operator Cards which are
connected to the reader
1. Remove the cover of the
wall reader.
2. Keep the button present
into the wall reader
pushed down.
3. Keep the button pressed
down and approach the
Activation Card to the
reader.
4. Approach a Neutral Card
to the reader in 8 seconds
from the flash of the red
LEDs.
5. Put the cover back to the
wall reader.
6. The new Operator Card
is now authorized to open
the lock up to the eventual
cancellation.
7. We suggest to mark
every Operator Card with
the name of the person
concerned.
1. Remove the cover of the
wall reader.
2. Keep the button present
into the wall reader
pressed down.
3. Keep the button
pressed down and
approach the Reset Card
to the reader.
4. Put the cover back to the
wall reader.
EN
*
9