Hoover 7125-02 Manual De Instrucciones página 9

ASSEMBLY INSTRUCTIONS
12. Attach grille (B) to fan body (A). Pinch grille mounting springs
and insert into narrow rectangular slots inside the fan body (A)
next to the fan motor. Fig. 13
13. Affix the light socket assembly (D) to the grille (B) using two long
machine screws (CC), lock washers (EE) and flat washers (DD).
Fig. 14
WARNING: DO NOT USE LONG WOOD SCREW IN PLACE
OF LONG MACHINE SCREWS.
Long Machine Screw
14. Affix long connect screw (GG) to light socket assembly (D).
Fig. 15
Adjust connect screw (GG) so as to allow top of glass globe
(C) to remain a minimum of 1/4 in. from the ceiling surface.
15. Install two 40 Watt candelabra bulbs (not included). Fig. 16
Place plastic ring (HH) onto connect screw before attaching
glass globe (C).
www.homewerksww.com
Plastic
Ring
Connect
Screw
Glass
Globe
9
Fig. 13
Fig. 14
Fig. 15
Fig. 16