Bissell PROHEAT 1799 Serie Guia Del Usuario página 10

Cleaning Your Floors
1
Set the ReadyTools™ Dial
to FLOOR CLEANING.
4
NOTE: Both the SmartMix formula tank and the 2-in-1 bladder need to have
liquid in them in order for the machine to spray. If one of the tanks are empty, the
machine will not spray.
-Caution: Do not overwet the carpet. Also take care not to run over loose
objects, edges of area rugs, or the cord.
-Stalling the brush may result in premature belt failure.
10 10
www.BISSELL.com
2
Plug the power cord into a
properly grounded outlet.
While pressing the trigger, make one slow pass
forward and back to put water and formula down.
Release the trigger and make one slow pass
forward and back over the same area to pick up
the water and formula that was just put down.
Repeat cleaning passes until the liquid coming up
appears clean. Continue passes without pressing
the trigger until you can't see any more water
being pulled up.
3
Press the Power Switch to
turn the machine ON.