Video Output; Delete All; Changing The Battery - LaserLiner VideoControl-Master Manual Del Usuario

Video output

8.7
Menu
Auto power off
Input source
Length measure
Video output

Delete all

Delete all
8.8
Menu
Auto power off
Input source
Length measure
Video output
Delete all
Instructions for use
• It is absolutely vital to ensure that the VideoControl-Master does not come into contact with chemicals,
current, moving or hot objects. This can damage the device and put its user at risk of serious injury.
• The LCD unit must not be immersed in water.
• The camera head is not acid-resistant or reproof.
• The VideoControl-Master must not be used for medical examinations/examining people.
• The device should always be stored in the case in which it was supplied.
• Avoid strong impact, extreme bending radii and deviations in temperature.
• To maintain the IP65 protection class, the caps on the connections must be rmly locked in.
• The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
USB data transfer
Data saved on the SD card can be transferred to PC either with a suitable card reader or directly via the
USB port. Please refer to the manual supplied with your card reader for information about connecting
your card adapter or card reader to a PC.

Changing the battery

Send in the unit to UMAREX-Laserliner for the battery to be changed.
24 GB
Delete all
Yes No
To use this function, the
VideoControl-Master
must be connected to a
!
monitor. The display on
the VideoControl-Master
is blanked out and the
functions are shown on
the external monitor.
Delete all
Yes No