Technical Data - LaserLiner VideoControl-Master Manual Del Usuario

Connecting to a monitor
The VideoControl-Master can be connected to a monitor with the supplied cable. Use connection „g" for this
purpose and select the corresponding video output in the menu, see „8.7 Video Output".
Connect power supply/battery charger
To charge the unit, plug the supplied power supply/battery charger into charging socket „i" and connect it to a
corresponding power source.
Reset
Pressing the Reset button „h" will restart the unit.

Technical data

Screen type
Connections
Wireless receiver
Display resolution
Image format / Image resolution
Video format / Image refresh rate
LED
Zoom
External memory
Port
Auto shutdown
Power supply
Operating time
Operating temperature
Storage temperature
Protection class
Humidity
Weight (incl. Li-Ion rechargeable battery)
Dimensions (W x H x D)
Guarantee, product care and disposal
This device complies with all necessary standards for the free movement
of goods within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
VideoControl-Master
5.0" TFT colour display
Industrial connector for camera
TV-Out port, PAL or NTSC
USB adapter, Type Mini-B
SD card slot
DC adapter for 5V DC power pack
Typical range 10 m, max. 30 m
ISM 2.4 GHz video transmission
Audio/Video (Stereo/PAL or NTSC)
receive 87 dB, SNR 42 dB, Fmod 15 kHz
640 x 480 pixels
JPEG format / 640 x 480 pixels
ASF / 30 frames / sec
10 brightness levels
2x digital zoom in 10% increments
2 GB SD card (supports up to max. 16 GB)
USB 2.0
5 min / 10 min / 15 min / 30 min (adjustable)
Li-Ion rechargeable battery / power pack
4 hours
-10 ... 60°C
-20 ... 70°C
IP65
max. 90 % relative humidity (no condensation)
0,86 kg
200 mm x 130 mm x 60 mm
Subject to technical alterations. 11.12.
GB 25