MANUAL MASSAGE
Tapping and rolling massage
Choose the "tapping rolling" or the "regional tapping rolling" mode.
The massage heads move to the most gentle position and the narrowest position and start the tapping
and rolling massage.
Use the "narrow"(
To raise the massage heads, press the "up"( ) button. To lower them, press the "down"( ) button.
When you wish to stretch only a certain part of the back, choose the "regional tapping rolling" mode.
You can change the area by pressing( ) and ( ) buttons.
Manual Mode
upward/downward
tapping
rolling/tapping rolling
(stroke: 600 mm)
regional rolling/regional tapping rolling
(stroke: 600 mm)
Massage intensity adjustment
Hold your finger on the intensity adjustment button (
When you adjust the massage intensity, the massage heads position may change.
Adjust the massage heads position again.
The massage heads stop automatically when they reach the maximum/minimum last intensity positions.
Release your finger from the button and operation will resume.
14
) or the "wide"(
) adjustment button to adjust the width of the massage heads.
Adjustability for Manual Massage
Up/down
Adjustment
Intensity
Adjustment
23 1/16"
(600 mm)
(45 mm)
23 1/16"
(600 mm)
(45 mm)
23 1/16"
(600 mm)
(15 mm)
23 1/16"
(600 mm)
(15 mm)
/
) to choose the massage intensity desired.
Width
Adjustment
1 3/4"
1 3/4"
3 5/16" or 4 5/16"
(85 or 110 mm)
10/16"
3 5/16" or 4 5/16"
(85 or 110 mm)
10/16"
3 5/16" or 4 5/16"
(85 or 110 mm)