ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2-3).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Lay the right inner side panel (G), the left
inner side panel (F), and both side panels (E)
on a clean, flat surface. The side with the most
predrilled holes should be facing up. Attach
two long connectors (CC) into predrilled holes
on each end of the panels with bolts (AA) as
shown.
2. Turn the right inner side panel (G) and the
left inner side panel (F) over and attach two
long connectors (CC) into predrilled holes on
each edge of the panels with bolts (AA) as
shown.
3. Insert 3 dowels (DD) into predrilled holes
in the left trim panel (K) and the right trim
panel (L). Slip the left trim panel (K) into the
predrilled holes in the edge of the left inner side
panel (F) until snug. Secure with bolts (AA) as
shown. Repeat using the right trim panel (L)
and the right inner side panel (G).
1
F
G
2
G
3
L
4
E
AA
CC
F
DD
AA
K
G
F
AA
CC