Pleasant Hearth 24-44-34M Manual De Montaje página 5

ASSEMBLY INSTRUCTIONS
4. Lay the top trim panel (P) curved side down.
Insert 2 long connectors (CC) into predrilled
holes and secure with bolts (AA).
5. Insert 2 dowels (DD) into predrilled holes in
each end of the top trim panel (P). Slip the left
end of the top trim panel (P) into the predrilled
holes in the edge of the left panel assembly
until snug. Repeat using the right panel
assembly.
6. Set base (B) on a clean, flat surface. Insert
4 dowels (DD) into predrilled holes in the base
(B) as shown. Slip previously assembled inner
panel over dowels (DD) until snug and secure
with bolts (AA). Slip each of the side panels (E)
into predrilled holes in left and right edges of
the base (B), flat side facing out, and secure
with bolts (AA).
4
5
6
E
AA
DD
5
AA
CC
P
DD
P
E
B