Tabla de contenido
Publicidad
Actualizado el 11 Enero 2002
CURRENT ADJUSTMENT VALUES
H 5 = Character alignment
TL5 = Top line front insert
BL3 = Bottom line top insert
CHARACTER ALIGNMENT PROCEDURE
Press the key (1-9) that corresponds
to the pair of H's that appear to be
most aligned
5 = selected line
Figura 2-1. Salidas impresas de ajuste y alineación
Capítulo 2. Ajustes de software de instalación, de servicio y de programas de utilidad
TL1
TL2
TL3
TL4
TL5
TL6
TL7
Measure from the top edge of this
paper to the top of each print line.
Press the key (1-9) that corresponds
to the print line that is closest to 5MM.
Ajustes de software
TL8
TL9
2-3
Publicidad
Capítulos
Tabla de contenido
