Adjusting The Shock Setting - B.O.B REVOLUTION FLEX DUALLIE Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BOB Gear
6� Test Alignment
Push stroller straight forward and
release to see if stroller veers right
or left. Repeat push test several
times.
If stroller consistently pulls to
left or right, see Fine Tuning the
Tracking.
Fine Tuning the Tracking
If Stroller Pulls LEFT
If your stroller pulls LEFT, turn
tracking knob counterclockwise up
to one half turn.
Tracking Knob
If Stroller Pulls RIGHT
If your stroller pulls RIGHT, turn
tracking knob clockwise up to one
half turn.
REPEAT roll test and adjust as
needed until stroller rolls straight.
Tracking Knob
10
Do not roll test with a child or
any occupant in the stroller�

Adjusting the Shock Setting

1� Remove Child From Seat
2� Set Shock Setting
Depress shock release knob
and simultaneously pull toward
back of stroller, sliding knob
into preferred position. Knob will
snap into place when in correct
position.
Position 1 is a SOFTER shock
setting recommended for
children 50 pounds (22�7 kg) or
less�
Position 2 is a FIRMER shock
setting recommended for
children weighing 51 to 100 lbs
(22�8 - 45�4 kg)
NOTE: Every time stroller is
folded, stroller shocks default to
position 1.
3� REPEAT on opposite side�

Publicidad

Tabla de contenido
loading

Tabla de contenido