ONDULADOR CC/CA 3000VA trifásico Industrial y Ferroviario
Three Phase 3000VA DC/AC INVERTER for Industry and Railway
DIMENSIONES
Profundidad máxima de los tornillos M4: 4.5mm
Maximum depth for the screws M4: 4.5mm
www.premium.es
/ DIMENSIONS
60Hz actuar el dip-switch según la figura.
Por motivos de seguridad es necesario:
Proporcionar al equipo una envolvente de protección conforme
a las directivas de seguridad eléctrica del país donde sea
instalado.
Incorporar un fusible a la entrada de una corriente
inmediatamente superior a la corriente máxima de entrada.
Usar conductores de sección apropiada para conectar entradas
y salidas. En la tabla siguiente se muestran las corrientes
máximas y las secciones mínimas de los conductores para
cada una de las conexiones de potencia.
START-UP
The unit has 4 threaded holes for the fixation on a mounting
surface.
The unit has internal fans. For an appropriate cooling, the air
input and output should be free of elements that cause and an
air flow reduction (minimum recommended distance to other
objects 50mm).
Make connections as shown in the figure.
The default output frequency is 50Hz. For 60Hz simply actuate
the dip-switch as indicated in the figure.
For safety reasons, the following requirements must be met:
Provide the equipment with some kind of protective enclosure
that complies with the electrical safety directives in effect within
the country where the equipment is installed.
Include an input fuse with a rating immediately higher than the
maximum input current.
Use cables of adequate cross-section to connect inputs and
outputs. The following table lists the maximum currents and the
minimum cross-sections for the cables used for each power
connection.
Input
24V
Maximum current
140 A
Cable
cross-section
mm
OPCIONES
VERSION INDUSTRIAL
VERSION FERROVIARIA
OPTIONS
INDUSTRIAL VERSION
RAILWAY VERSION
ACCESORIOS
Escuadras de montaje (dos unidades)
ACCESSORIES
Mounting brackets (two units + screws) NP-9282
3/7
Input
Input
Input
36V
48V
72V
130 A
100 A
66 A
50
50
25
16
2
mm
2
mm
2
mm
2
CÓDIGO DE PEDIDO
ODX-3000-74XX.B
ODX-3000-74XX-T
ORDERING CODE
ODX-3000-74XX-B
ODS-3000-74XX-T
CÓDIGO
NP-9282
CODE
29-06-2016
9502-134-11
ODX-3000
Input
Output
110V
400V
44 A
5.5 A
10
1.5
mm
2
mm
2
CA-502-11